To Set Cruise Control Speed - Hyundai VERACRUZ ix55 Owner's Manual

Driving your vehicle
E090100AEN

To set cruise control speed:

1. Push the CRUISE ON-OFF button on
the steering wheel to turn the system
on. The CRUISE indicator light in the
instrument cluster will illuminate.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
5 32
OEN056011
3. Push the COAST/SET switch, and
release it at the desired speed. The SET
indicator light in the instrument cluster
will illuminate. Release the accelerator
at the same time. The desired speed will
automatically be maintained.
On a steep grade, the vehicle may slow
down or speed up slightly while going
downhill.
OEN056012
E090200AUN
To increase cruise control set
speed:
Follow either of these procedures:
• Push the RES/ACCEL switch and hold
it. Your vehicle will accelerate. Release
the switch at the speed you want.
• Push the RES/ACCEL switch and
release it immediately. The cruising
speed will increase by 1.6 km/h (1.0
mph) - Gasoline engine or 2.0 km/h
(1.2 mph) - Diesel engine each time
the RES/ ACCEL switch is operated in
this manner.
OEN056013