Ambient Switch; Manual Operation; Automatic Operation - Hyundai XG300 2001 Owner's Manual

B970C02L-AAT

Automatic Operation

The FATC (Full Automatic Temperature Con-
trol) system automatically controls the heating
and cooling as follows:
1. Push the "AUTO" switch. The indicator light
will come on confirming that the Face, Floor
and/or Bi-Level modes as well as the blower
speed and, air conditioner will be controlled
automatically.
FEATURES OF YOUR HYUNDAI
2. Push the "TEMP" button to set the desired
B970B01L
temperature.
The temperature will increase to the maxi-
mum 90° F(32° C) by pushing on the
ton. Each push of the button will cause the
temperature to increase by 1°F (0.5°C).
The temperature will decrease to the mini-
mum 62°F(17°C) by pushing on the
ton. Each push of the button will cause the
temperature to decrease by 1°F (0.5°C).
NOTE:
If the battery has been discharged or dis-
connected, the temperature mode will reset
as centigrade degree.
This is a normal condition and you can
adjust the temperature mode from centi-
grade to farenheit as follows;
Press the TEMP button down 3 seconds or
more with the AMB button held down. The
display shows that the unit of temperature
is adjusted to contigrade or fahrenheit.
(°C → → → → → °F or °F → → → → → °C)
B970B01L
NOTE:
Never place anything over the sensor which
is located on the instrument panel to ensure
but-
better control of the heating and cooling
system.
B995A01Y-GAT
but-

AMBIENT SWITCH

Pressing the AMB button displays the ambient
temperature on the VFD.
B980A01Y-AAT

MANUAL OPERATION

The heating and cooling system can be con-
trolled manually as well by pushing buttons
other than the "AUTO" button. In this state, the
system sequentially works according to the
order of buttons selected.
The function of the buttons which are not se-
lected will be controlled automatically.
Press the "AUTO" button in order to convert to
automatic control of the system.
Photo sensor
YT10677A
1- 57