Setup Code Correlation - Kenwood KR-V8090 Instruction Manual

4 2

Setup code correlation

Deleting a setup code
1 Hold down the ENT key until the backlight flashes twice.
2 Select the component to be deleted.
Press the VIDEO, AUDIO, or TV key repeatedly to select the
desired component.
3 Enter the 3 digit code "991".
4 Hold down the ENT key until the backlight flashes twice.
Checking a setup code
1 Hold down the ENT key until the backlight flashes twice.
2 Select the component with setup code you want to check.
Press the VIDEO, AUDIO, or TV key repeatedly to select the
desired component.
3 Enter the 3 digit code "990".
4 Press the 1 key and count the number of times the backlight
blinks. This is the first number of the 4 digit setup code.
5 Press the 2 key and count the number of times the backlight
blinks. This is the second number of the 4 digit setup code.
6 Press the 3 key and count the number of times the backlight
blinks. This is the third number of the 4 digit setup code.
7 Press the 4 key and count the number of times the backlight
blinks. This is the fourth number of the 4 digit setup code.
Getting the most from your remote control
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
BAND
4 6 ¢
7
REC GUIDE
TUNING/SKIP VOLUME
MUTE
LISTEN
SUBWOOFER MODE SOUND
FUNCTION
SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
+100 REPEAT RANDOM
Keys or controls used in this operation.
7 8 9
DISPLAY
+10 0 ENT
• At this time all inputs become available regardless of any earlier
registration.
• Example 1 : To delete the registration of the component connected to
the VIDEO 1 jacks, select "VIDEO 1".
Perform each step within 5 seconds.
• To resume the factory settings, proceed step 1, then enter "981".
• The backlight flashes twice immediately after the "0" is input to confirm
input.
• If the backlight does not blink, the first digit in the setup code is 0.
• If the backlight does not blink, the second digit in the setup code is 0.
• If the backlight does not blink, the third digit in the setup code is 0.
• If the backlight does not blink, the fourth digit in the setup code is 0.
Perform each step within 5 seconds.
KR-V9090/8090 (En/T)