Setup Code Correlation - Kenwood 1070VR Instruction Manual

1070VR/10B0VR (En/K)
f ; .
Res Keys or controls used in this operation.
Setup code correlation
PR SE NE A
Deleting a setup code
@ Hold down the ENT key until the backlight flashes twice.
@ Select the component to be deleted.
Press the VIDEO, AUDIO, or TV key repeatedly Lu svlect we
desired component.
© Enter the 3 digit code "991".
@ Hold down the ENT key until the backlight flashes twice.
Checking a setup code
@ Hold down the ENT key until the backlight flashes twice.
@ Select the component with setup code you want to check.
Press the VIDEO, AUDIO, or TV key repeatedly to select the
desired component.
@ Enter tho 2 digit codo "990".
Sh CR A A RS Rr ct
*At this time all inputs become available regardless of any earlier
registration
pF Perform each step within 5 seconds.
¢ The backlight flashes twice immodiataly after the "0" io input to centirm
input
* If the backlight does not blink, the first digit in the setup code is 0.
© If the backlight does not blink, the second digit in the setup code is 0.
* If tho baoklight doco not blink, the third digit in the setup wuue is 0.
* If the backlight does not blink, the fourth digit in the setup code is 0.
Dp)
Perform each step within 5 seconds.