Setup Code Chart - Kenwood VR Series Instruction Manual

VR/KRF-V SERIES {En/KMl
O
Numeric keys
If CD or MD is selected as the input source,
these keys function as numeric keys. If tuner
is selected as the input source, these keys
are used to call up station presets.
G Component operation keys
Use these keys to operate other compo¬
nents with system control connections to
the receiver.
<4 key
If tape is selected as the input source, this
key functions as the play key for side B of the
cassette (the side facing away from the front
of the deck).
BAND (►/«) key -Q2
If tuner is selected as the input source, this
key functions as the band selector key.
If CD is selected as the input source, this key
functions as the play/pause key.
If MD is selected as the input source, this
key functions as the play key.
DISC SKIP, A/B, ^100 key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
If TAPE is selected as the input source, this
(A and B) of a double cassette deck.
AUTO (B)key -Q3
If tuner is selected as the input source, this
key functions as the AUTO key.
If CD or MD is selected as the input source,
this key functions as the stop key.
TUNING («** ►►) keys
-Q£
If tuner is selected as the input source, these
keys function as tuning keys.
If CD or MD is selected as the input source,
these keys function as search keys.
P.CALL (h#4 ►M) keys
~[j£)
If tuner is selected as the input source, these
keys function as P.CALL keys.
If C D or MD i s selected as the input source,
these keys function as skip keys.
O LISTEN MODE, TITLE key -QB
Use to select the listening mode.
G MUTE, ENTER key
Use to temporarily mute the sound
0 SOUND key -QB
Use to adjust the sound quality and ambi¬
ence effects.
G MULTI CONTROL key
Used to make a variety of settings.
G DVD CONT keys
Used to operate DVD player.
While holding this key depressed, press
any of the keys masked in gray inthe
above illustration to operate the
corresponding function of a DVD player
from KENWOOD.
Keys
O. G, G, G
and
G
are given the
following functions during the DVD player
control operation.
G
: TITLE
G
:ENTER
O :SUB TITLE
G :MENU
G
:OSD
For details, refer to the instruction manual
of your DVD player.
O POWER key -QB
Use to switch the power ON/STANDBY
when the POWER is turned ON.
0
SOURCE DIRECT key -QB
G VOLUME CONTROL key
G
SETUP key -QB
Use to select the surround sound settings.
G
Input selector keys -QB
Use to select the receiver's input source.