Dsp Mode Setup - Kenwood KR-V8090 Instruction Manual

1 6

DSP mode setup

1
Select a DSP mode.
2
Adjust the EFFECT level.
1 Press to select EFFECT.
2 Use the TUNING/SKIP +/– keys on the
3
Adjust the WALL type.
1 Press to select WALL.
2 Use the TUNING/SKIP +/– keys on the
DSP
SETUP
remote to select the level you desire.
TUNING/SKIP
SETUP
remote to select the type you desire.
TUNING/SKIP
Preparing for surround sound
• The following adjustments (effect level, wall type, and room size) are
common for all DSP modes. If necessary these modes can be adjusted
again according to your preference after listening to the surrround
effect they produce.
• The subwoofer, center mode and test tone adjustments made in the
PRO LOGIC mode are automatically applied to the DSP modes.$
A R E NA
When the "ARENA" DSP mode is selected
E F F EC T 3
Display when the EFFECT level setting is selected
• The EFFECT level is adjustable in 5 steps, 1 Ô 5 (larger number
represent a stronger effect).
W A L L HA RD
Display when the WALL type setting is selected
• The WALL type is adjustable in 3 steps, "HARD" (hard), "MED"
(medium) and "SOFT" (soft).
KR-V9090/8090 (En/T)
Lights
DSP
DSP
DSP