Connecting Audio Components - Kenwood KR-V8090 Instruction Manual

Connecting audio components

Make connections as shown below.
When connecting the related system components, be sure
to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
(KR-V9090 only)
Multi-channel decoder
(etc.)
The sound input to AUX.6CH.INPUT
is paired with the video signal input
0¡
to VIDEO 2.
Record player
Caution regarding placement
To maintain proper ventilation, be sure to
leave a space around the unit (from the
largest outer dimensions, including pro-
jections) equal to, or greater than shown
below:
Left and right panels: 10 cm, Rear panel: 10
cm, Top panel: 50 cm
1. Connect all cords firmly. Loose connections may prevent proper sound transmission or produce noise.
2. Be sure to remove the power cord from the AC outlet before plugging or unplugging any connection cords. Plugging / unplugging connection
cords without disconnecting the power cord can cause malfunctions and may damage the unit.
Notes Notes
3. Do not connect power cords from components whose power consumption is larger than what is indicated on the AC outlet at the rear of
this unit.
6CH input (M.INPUT)
(KR-V9090 only)
AUX.6CH.INPUT
CENTER
L
R
FRONT SURROUND SUB
WOOFER
PHONO CD TAPE/MD
REC PLAY
OUT IN
L
R
SIGNAL
GND
Microcomputer malfunction
If operation is not possible or an erroneous display appears, even
though all connections have been made properly, reset the
microcomputer referring to "In case of difficulty".
SYSTEM CONTROL jacks
For SYSTEM CONTROL connections to
KENWOOD components
SYSTEM CONTROL
ƒ
SL 16 XS 8
To AC wall outlet
AUDIO
VIDEO1 VIDEO2 VIDEO3 ADAPTOR
REC PLAY PLAY PLAY
OUT IN IN IN OUT IN
Setting up the system
KR-V9090/8090 (En/T)
!
SYSTEM CONTROL
cord
SYSTEM CONTROL
switch
Shape of AC outlets
U.K.
Except for U.K.
OUT
Graphic equalizer ¡
IN
PLAY
REC
Cassette deck or
MD recorder
CD player
9
T