Specifications - Kenwood KR-V8090 Instruction Manual

Specifications

AUDIO section
Rated power output during STEREO operation
(KR-V9090)
(DIN) 1 kHz, 0.7% at 4
(IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4
(KR-V8090)
(DIN) 1 kHz, 0.7% at 4
(IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4
Rated power output during SURROUND operation
(KR-V9090)
FRONT(1kHz, 0.7% T.H.D. at 4
CENTER (1kHz, 0.7% T.H.D. at 4
SURROUND(1kHz, 0.7% T.H.D. at 4
(KR-V8090)
FRONT(1kHz, 0.7% T.H.D. at 4
CENTER (1kHz, 0.7% T.H.D. at 4
SURROUND(1kHz, 0.7% T.H.D. at 4
Total harmonic distortion
(KR-V9090) .............................. 0.015 % (1kHz, 60 W, 4 )
(KR-V8090) .............................. 0.015 % (1kHz, 55 W, 4 )
Frequency response
CD ...................................... 5 Hz ~ 85 kHz, +0.5 dB, –3 dB
Signal to noise ratio (DIN)
PHONO (MM) ............................................................ 62 dB
CD .............................................................................. 60 dB
Input sensitivity / impedance
PHONO (MM) ............................................ 2.5 mV / 47 k
CD ............................................................. 200 mV / 47 k
ADAPTOR IN ............................................ 400 mV / 10 k
Output level / impedance
TAPE REC ................................................... 200 mV / 1 k
ADAPTOR OUT .......................................... 200 mV / 1 k
PRE OUT (CENTER, SURROUND) ................ 1 V / 600
PRE OUT (SUBWOOFER) ................................ 1 V / 1 k
Tone control
BASS ....................................................
TREBLE .................................................
LOUDNESS control
VOLUME at -40dB level ... +7 dB(100 Hz), +3 dB(10 kHz)
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................. 1 Vp-p / 75
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Note Note
120 W + 120 W
120 W + 120 W
110 W + 110 W
110 W + 110 W
) ........... 120 W + 120 W
) ....................... 120 W
) ...... 60 W + 60 W
) ........... 110 W + 110 W
) ....................... 110 W
) ................. 110 W
8 dB (at 100 Hz)
8 dB (at 10 kHz)
Caution : Read this page carefully to ensure safe operation.
FM tuner section
Tuning frequency range ....................... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN, 75
MONO ......... 1.2 V / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ........ 35 V / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN, 1 kHz)
MONO ............................................ 0.2 % (65.2 dBf input)
STEREO .......................................... 0.5 % (65.2 dBf input)
Signal to noise ratio (DIN weighted, 1 kHz)
MONO .................... 65 dB (40 kHz DEV., 65.2 dBf input)
STEREO .................. 60 dB (46 kHz DEV., 65.2 dBf input)
Stereo separation (DIN, 1 kHz) ..................................... 40 dB
Selectivity (DIN, 300 kHz) ............................................ 64 dB
Frequency response (30 Hz ~ 15kHz) ........ +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ........................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
........................................................... 16 V / (600 V/m)
Signal to noise ratio (30 % mod., 1 mV input) ............ 48 dB
GENERAL
Power consumption
(KR-V9090) .............................................................. 330 W
(KR-V8090) .............................................................. 280 W
AC outlet
SWITCHED ....................................... 2 (total 100 W max.)
Dimensions ........................................................... W : 440 mm
......................................................................... H : 147 mm
......................................................................... D : 392 mm
Weight (Net)
(KR-V9090) ............................................................... 11 kg
(KR-V8090) ............................................................... 10 kg
KR-V9090/8090 (En/T)
)
5 7