Setup Code Chart - Kenwood VR Series Instruction Manual

\/Rrt<RF-V SERIES {En/KMi
O NumeHc keys
If CD or MD is selected as the input source,
these keys function as nurnerlc keys. If tuner
is selected as the input source, these keys
are used to call up station presets.
O Component operation keya
Use these keys to operate other compo¬
nents with system control connections to
the receiver.
M
key
If tape is selected as the input source, this
key functions as the play key for side 6 of the
cassette (the side facing away from thef ront
of the deck).
BAND (e/ii) key
If tuner is selected as the input source, this
key functions as the band selector key.
If CD is selected as the input source, this key
functions as the play/pause key.
If MD is selected as the input source, this
key functions as the play key.
DISC SKIP. A/B. +100 key
If CD is selected as the inpul source, this key
functions asthemultK^D player disc skipkey.
If TAPE is selected as the input source, this
(A and B) of a double cassette deck.
AUTOWkey
If tuner is selected as the input source, this
key functions as the AUTO key.
If CD or MD is selected as the input source,
this key functions as the stop key.
TUNING keys
-W
If tuner is selected as the input source, these
keys function as tuning keys.
If (jo or MD is selected as the input source,
these keys function as search keys.
P.CALL keya
If tuner is selected as the input source, these
keys function as P.CALL keys.
if CD or MD is selected as the input source.
these keys function as skip keys.
O LISTEN MODE. TirLE key -CH]
Use to select the listening mode.
O MUTE. ENTER key
Use to temporarily mute the sound.
O SOUND key -1^
Use to adjust the sound quality and ambi¬
ence effects.
O MULTI CONTROL key
Used to make a variety of settings.
G DVD CONT keye
Used to operate DVD player.
While holding this key depressed, press
any of the keys masked in gray inthe
above illustration to operate the
corresponding function of a DVD player •
from KENWOOD.
Keys O, O, O, O and 0 are given the
following functions during the DVD player
control operation.
O
:Tm.E
O :ENTER
O :SUB TITLE
O :MENU
9 :OSD
For details, refer to the instruction manual
of your DVD player.
O POWER key -Cg]
Use to switch the power ON/STANOBY
when the POWER is turned ON.
O SOURCE DIRECT key -CSl
^ VOLUME CONTROL key
0 SETUP k^
Use to select the surround sound settings.
9 Input eelecter keye
Use to select the receiver's input source.