Normal Playback; Listening To A Source Component - Kenwood KR-V8090 Instruction Manual

Normal playback

Preparations
1 8
• Turn on the power to the related compo-
• Set the POWER key to the ON position.

Listening to a source component

1
Turn on the receiver.
2
Select a speaker system.
SP. A B
A B
The indicator for the speakers you want to use should be lit.
3
Select the source you desire.
4
Start playback from the selected source.
5
Adjust the volume.
Decrease volume
nents.
POWER
-ON –OFF
ON/STANDBY
B
A SPEAKERS
PHONO
INPUT SELECTOR
VOLUME CONTROL
DOWN UP
Increase volume
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
AUDIO VIDEO SURROUND RECEIVER KR-V9090
BAND
4 6 ¢
7
REC GUIDE
TA/NEWS/INFO. PTY DISPLAY
TUNING/SKIP VOLUME
MUTE
ON/STANDBY
A SPEAKERS B
POWER
LISTEN
SUBWOOFER MODE SOUND -ON –OFF
PHONES
FUNCTION SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
+100 REPEAT RANDOM Keys or controls used in this operation.
7 8 9
DISPLAY
+10 ENT
0
A ON : Sound from the speakers connected to the SPEAK-
ERS A terminals on the rear panel.
B ON : Sound from the speakers connected to the SPEAK-
ERS B terminals on the rear panel.
A+B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones for stereo sound in all
playback modes.
• When both SPEAKERS A and B are ON, activating a surround mode
turns SPEAKERS B OFF automatically.
The input sources change as shown below:
1 TUNER (Frequency display)
2 "PHONO"("PHONO"*)
3 "VIDEO1" ("SAT"*)
4 "VIDEO2" ("LD"*)
5 "VIDEO3" ("VCR"*)
6 "AV AUX"
7 "CD" ("CD"*)
8 "TAPE/MD" ("TAPE"*)
* Once setup codes are registered in the remote control, the input name
display changes according to the name of the registered component.
Example: if you register a VCR at the VIDEO 1 jacks, "VCR1" appears
instead of "VIDEO 1".
• When using the remote control after initial setup, any inputs that have
not been registered with a setup code are deleted from the cyclic list
(except for the "AV AUX" VIDEO input).
• The INPUT SELECTOR on the front panel of the receiver always cycles
through all inputs.
VOL -6) dB
SP. A
A
KR-V9090/8090 (En/T)
PRO LOGIC 3 STEREO
STEREO DSP
LEVEL INPUT SELECTOR
LOUDNESS SOURCE DIRECT
STANDBY INDICATOR MUTE
+10/
1 2 3 4 5 6 7 8 9 0 PTY SEARCH
DIMMER MUTE
LEVEL CONTROL
DIRECT MEMORY AUTO BAND TUNING BASS TREBLE
CENTER MODE
AV AUX
T R A I T R
thermally reactive advanced instantaneous transistor VIDEO
Volume display
VOLUME CONTROL
DOWN UP
L - AUDIO - R
fi
‡