Setting Up The System; Connecting The Antennas - Kenwood KR-V8090 Instruction Manual

Setting up the system

Connecting the antennas

8
Make connections as shown below.
Do not connect the power cord to a wall outlet until all connections are completed.
Antenna terminal connections
1 Push lever.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as
possible from the receiver, TV set, speaker cords and power
cord, and adjust the direction for best reception.
AM loop antenna
FM indoor antenna
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable
signal reception we recommend using an outdoor antenna.
Disconnect the indoor antenna when you connect one outdoors.
2 Insert cord.
3 Return lever.
ANTENNA
AM
GND
FM75
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75
Use an optional antenna adaptor
FM outdoor antenna
KR-V9090/8090 (En/T)
terminal.