Connecting Other Devices - Sony Ipela NSR Series Installation Manual

Connecting the NSR-1200/1100/1050H to the
NSRE-S200
Mini-SAS cable
Connecting two NSRE-S200 units
Caution
• Do not use an NSRE-S200 in conjunction with iSCSI
storage.
• Be sure to connect the mini-SAS cables securely, so
they will not disconnect. If a mini-SAS cable
disconnects during unit operation, recording errors
may occur. Always turn off the units before
connecting or disconnecting the mini-SAS cables.

Connecting Other Devices

Connecting Sensor Inputs and Alarm
Outputs
Connect the wires to the sensor input connector and the
alarm output connector.
For details, see "I/O Port" (page 32).
Mini-SAS output
connector
Mini-SAS input
connector
Mini-SAS output
connector
Mini-SAS cable
Mini-SAS input
connector
Connecting an Uninterruptible Power
Supply (UPS)
1
Connect the UPS to the power outlet.
2
Connect the NSR to the UPS with the supplied
power cord.
3
Connect the NSR to the UPS with the dedicated serial
cable to the serial connector on the rear of the NSR.
Serial cable
Power cord
UPS
Connecting an Audio Output Device
Connect the audio output device to the audio output
connectors (L and R).
Audio cable (L and R)
To Power source
19
Step 2: Connections