Features And Functions; Front (When The Cover Is Opened) - Sony Ipela NSR Series Installation Manual

Network surveillance server
Hide thumbs Also See for Ipela NSR Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Features and Functions

Front (When the Cover is Opened)

NSR-1200/1100/1050H
1
POWER
qs
qa
0
A Power LED
Lights green when the unit is turned on.
Lights amber when it is on standby.
B Network LED (1 to 3)
Lights green when there is activity at the corresponding
LAN connector at the rear of the NSR.
C HDD LED
Blinks green when the internal hard disks are accessed.
Lights amber when an error occurs with a hard disk.
D Status LED (1 to 4)
Lights in sequence (1, 2, 3, 4) when the NSR starts.
When an error occurs, the corresponding status LED
lights together with the error LED, which lights or blinks
to indicate the type of error.
For details, see "STATUS LED" (page 31).
E Error LED
Lights or blinks when an error occurs.
F REC LED
Lights when recording images.
G DVD/CD drive
Use this drive to write data from the NSR hard disks to
DVD and CD.
H USB connector
Use this connector to connect a USB keyboard, mouse,
USB flash memory, or system controller
(RM-NS1000) to the NSR.
8
Features and Functions
2
3
NETWORK
1
2
3
HDD
1
2
3
9
8
4
5
4
STATUS
1
2
3
4
ERROR
I Monitor connector 1
Use this connector to connect a monitor.
Monitor connector 1 (and monitor connector 1 on the
rear of the unit) and HDMI monitor connector 1 on the
rear of the unit cannot be used at the same time.
J Power switch
Press this to turn on the unit. (You cannot turn off the
unit with this switch.)
K Lock
Use this in conjunction with the supplied front panel key
to lock the front bezel. When the front bezel is locked,
you cannot pull out the front bezel. Also, do not lock the
front bezel when the front bezel is pulled out. You can
distinguish the locked position from the unlocked
position by looking at the lock, as illustrated below.
The front bezel is
locked
L Vent holes
These openings allow air to flow from the front of the
NSR to the rear.
Do not block the vent holes, allow dust to accumulate in
the inner mesh of the vent holes, or obstruct the airflow
in any way. Obstructing the airflow allows heat to build
up inside the NSR and may result in fire or damage.
6
REC
7
The front bezel is
unlocked

Advertisement

Table of Contents
loading

Table of Contents