Connecting The Power Cord - Sony Ipela NSR-1000 Series First Step Manual

Connecting the Keyboard, Mouse and
System Controller
Connect the devices to the USB connectors on the front
and rear of the unit.
Example) When connecting to the USB
connector on the rear
Keyboard
System Controller
Connecting the Network Cameras
Connect the network cameras and the unit to the same
network segment.
Network switch
Network camera 2
Network camera 1
Connecting the Analog Cameras (only
with the NSR-1050H or NSBK-A16/A16H
expansion)
Use the supplied analog camera input cable to connect
the analog cameras.
Connect the analog cameras to the black video input
connectors. Each of the connectors on the analog camera
input cable is labeled with a BNC number from V1 to
V16. The connected cameras are assigned as "Analog
camera 1," "Analog camera 2," and so on, based on the
order of the BNC numbers to which they are connected.
Mouse
LAN connector 1
Network camera 3
Note
We recommend connecting the cameras in an order that
will make it easy to operate them on the screen.
Analog camera cable input connector
Analog camera input cable
Video input connecter
Analog camera 1
Analog camera 2
Note
The white connectors (A1 to A4, 4 total) on the analog
camera input cable are used for audio input.

Connecting the Power Cord

Connect the power cord to the power supply connector.
Attach the safety clip to prevent the power cord from
disconnecting.
(black)
5
Step 1: Installation