SC733 Chassis Manual
4-7
Installing Expansion Cards
PCI Slots
Remove Screws
PCI Slot Setup
SC733 chassis includes seven PCI slots for expansion cards.
Installing Expansion Cards
1. Disconnect the power supply, set the chassis on a flat surface, and open the
chassis cover.
2. Remove the screws holding the cover in place for each add-on/expansion
card slot you want to use. Keep this screw for later use.
3. Connect the add-on cards and/or expansion cards to the mother board.
4. Secure each card to the chassis using the card's L-bracket and the screw
previously removed.
Figure 4-12: Installing Expansion Cards
4-12