Control Panel Buttons; Control Panel Leds - Supero SC733i-665B User Manual

SC733 Chassis Manual
3-2

Control Panel Buttons

There are two push-buttons located on the front of the chassis. These are a reset
button and a power on/off button.
Reset: The reset button is used to reboot the system.
Power: The main power switch is used to apply or remove power from the power
supply to the server system. Turning off system power with this button removes the
main power but keeps standby power supplied to the system. Therefore, you must
unplug system before servicing.
3-3

Control Panel LEDs

The control panel located on the front of the SC733 chassis has five LEDs. These
LEDs provide you with critical information related to different parts of the system.
This section explains what each LED indicates when illuminated and any corrective
action you may need to take.
Power: Indicates power is being supplied to the system's power supply units. This
LED should normally be illuminated when the system is operating.
3-2