Installing Expansion Cards - Supero SUPERSERVER 1028U Series User Manual

SUPERSERVER 1028U Series Series User's Manual
6-6

Installing Expansion Cards

The system accepts two full height full-length expansion cards or one double width
GPU, and one low profile card, mounted on a riser card and riser bracket. There
is also an internal expansion slot in the center of the chassis. Additional fans are
recommended; see Section 6-7.
Installing a Full Height or GPU Expansion Card
1. Power down the system as described in section 6-2 and remove the cover.
2. Remove the bracket and sections of the chassis in the rear. Small screwdriver
icons are etched into the chassis pieces to help identify which screws must be
removed.
Figure 6-4. Riser Card Bracket and Expansion Slots
Figure 6-5. Example of Screwdriver Icons
Icons
6-6