Installing Hard Drives In The Sc733T And Sc733Tq - Supero SC733i-665B User Manual

4-4

Installing Hard Drives in the SC733T and SC733TQ

Figure 4-4: Removing the Hard Drive Carrier from the Chassis
The SC733T and SC733TQ models feature hot-swappable hard drives, which permit
the exchange of hard drives, without powering down the system
Removing Hard Drive Carriers in the SC733T and SC733TQ Chassis
1. Unlock the front bezel panel of the chassis and swing the panel to the right to
open it as shown above.
2. Press the release button on the front of the drive carrier. This will release the
drive carrier handle.
3. Using the drive carrier handle, gently pull the drive carrier out of the chassis.
Warning! Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro
web site at http://www.supermicro.com.
Chapter 4: Chassis Setup and Maintenance
4-5
2
Release
Button