Hitachi DZ-GX5020A K Service Manual page 34

Troubleshooting > Messages and Troubleshooting
Message
Disc error has occurred.
Finalizing is not complete.
Disc error has occurred.
Format the disc now?
YES NO
Disc error has occurred.
Formatting is not complete.
Disc error has occurred.
Keep disc inside & restart.
Cause/condition for
message to appear
Appears when the disc could not be
fi nalized because it was dirty.
Appears if accident, such as power off,
has occurred during fi nalizing.
If the message still appears even when
the disc has been cleaned and fi nalized
again and again, the disc may be
defective.
Appears when reading or writing from/to
recorded fi le cannot be performed
because the disc is dirty.
Appears when a DVD-RAM/DVD-RW/
+RW initialized on PC, etc., or a card
whose initialization was suspended
before, is loaded.
Appears when the disc could not be
normally formatted because it was dirty.
Also appears when a warped or distorted
disc was loaded, or a logically damaged
disc whose formatting was suspended is
loaded.
Appears if a problem has occurred
during editing of movie fi le.
4 - 6
Troubleshooting
Refer to "4-3-5 Cleaning disc and
optical pickup" and clean the disc.
Or replace the disc.
Set the power switch to " OFF" and
reconnect the AC adapter/charger;
then set the power switch to "Movie"
and start fi nalizing again. Or press
the DISC EJECT button, reload the
disc, and then execute fi nalizing.
Replace the disc.
Refer to "4-3-5 Cleaning disc and
optical pickup" and clean the disc.
Or replace the disc.
Choose "YES" and designate it to
initialize the DVD-RAM/DVD-RW/
+RW (deleting all recorded data).
Refer to "4-3-5 Cleaning disc and
optical pickup" and clean the disc.
Or replace the disc.
Replace the disc.
Exit the Disc Navigation function
and set the power switch to "OFF"
with the disc loaded; then reconnect
the AC adapter/charger and set the
power switch to "Movie" or "Disc
Still" (The DVD video camera/
recorder will automatically repair
the video fi le.)