Creation Software - Hitachi DZ-GX5020A K Service Manual

Adjustment > Creating Reference Data
6-1-6 Copying or Deleting Adjustment Software
Information:
The software for creating reference data is included in the adjustment software.
(1) Copy
1) Start the PC.
2) Start Explorer and create a new folder in HDD of PC. The name "map07w" is recommended for
the folder: If a folder with the same name exists, give the folder a similar name that is easily
understandable.
Note:
Be sure to manage the adjustment softwares for Windows and MS-DOS in different folders:
Managing them in the same folder will interfere with adjustment.
3) Decompress the downloaded adjustment software. The adjustment software is usually compressed
in the LZH or ZIP format.
4) Copy all folders and fi les created after decompression to the map07w folder.
(2) Deleting
If it is necessary to delete the adjustment software from hard disk drive (HDD) of PC, delete the
map07w folder that was created during storage.
6-1-7 Starting and Terminating Reference Data Creation Software
Make sure that the connections are correct, the power switch on DVD video camera/recorder is set to
"Movie", and the DC power supply for DSP-R jig is turned on: The reference data creation software
will not start unless the connections for creating reference data are correct, and the DVD video
camera/recorder or DSP-R jig is powered.
For subsequent operation, operate the PC mouse while watching the PC monitor screen.
Information:
1) Display ×××× on subsequent PC screen shows the model name.
2) The numbers on PC screens show the operational procedure.
(1) Start
1) Start the PC. If the PC has already started, terminate all other applications.
2) Start Explorer, and double-click the "SETUPforMAP2007W.EXE" fi le in map07w folder to start
the software.
3) Once the software has started, the COMMUNICATION PORT SETTING screen will appear.
6 - 7