Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category............................Electric Lawn Trimmer
Type(s) ............................EIT250, EIT300
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 31.12.09), 2006/42/EC (from 01.01.10), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN786, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
product(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure...............
Notified Body.................................................
Newton Aycliffe 29/01/2008
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (W)
Measured Sound Power L
Guaranteed Sound Power L
Level (dB(A))
Value (m/s
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
5051957-01
EC Declaration of Conformity
at the operatorʼs position, recorded on a sample of the above
pA
& Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
(dB(A))
WA
(dB(A))
WA
2
)
Husqvarna UK Ltd.
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 1325 302302 Fax - (00) 44 1325 310339
values are according to the tabulated
WA
EIT250
EIT300
25
30
10,500
10,300
500
700
91
95
96
96
79
81.8
2.91
1.37
3.26
3.45
Need help?
Do you have a question about the Contour PowerPlus and is the answer not in the manual?