Carton Contents - Flymo Contour PowerPlus Original Instructions Manual

Instruction
Manual
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 01325 300303
If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the opera-
tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and
efficiency in using this trimmer. The operator is responsible for following the warning and safety instruc-
tions in this manual and on the trimmer.
Explanation of Symbols on the Contour Power Plus
Warning
Read the user instructions carefully to
make sure you understand all the con-
trols and what they do.
10m
Keep bystanders away. Do not oper-
ate whilst people especially children or
pets are in the area.
General
1. This product is not intended for use by persons (in-
cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the product by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the product. Local regulations may restrict the age of
the operator.
2. Only use the trimmer in the manner and for the func-
tions described in these instructions.
3. Never operate the trimmer when you are tired, ill or
under the influence of alcohol, drugs or medicine.
4. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Electrical
AVOID ACCIDENTAL STARTING. REMOVE PLUG

Carton Contents

Switch Handle
Steady Handle
Tube
Trimmer Head
Wheel
Fax : 01325 302530
Safety
Guard
The use of eye protection is recommended
to protect against objects thrown by the
cutting parts.
Do not operate in the rain or leave the
product outdoors while it is raining.
Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.
Warning: The cutting line continues to rotate after the
machine has been switched off.
FROM MAINS AND KEEP FEET AWAY FROM THE
SWITCH LEVER WHEN:- CLEANING AROUND THE
INSIDE OF THE SAFETY GUARD, REMOVING OR
REFITTING SPOOL CAP , MANUALLY FEEDING OR
REPLACING NYLON LINE.
1. The British Standards Institute recommend the use
of a Residual Current Device (R.C.D.) with a tripping
current of not more than 30mA. Even with a R.C.D.
installed 100% safety cannot be guaranteed and
safe working practice must be followed at all times.
Check your R.C.D . every time you use it.
2. Before use, examine cable for damage. If there are
signs of damage or ageing, it must be replaced by
the manufacturers service agent or a similar qualified
person to avoid hazard.
3. Do not use the trimmer if the electric cables are
damaged or worn.
Electric Cable with
moulded on plug