Instruction
Manual
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 0844 844 4558 UK
WARNING. When using the product the safety rules must be followed. For your own safety and that of by-
standers please read these instructions before operating the product. Please keep the instructions safe
for later use.
Explanation of Symbols on the product
Warning
Read the user instructions carefully to
make sure you understand all the con-
trols and what they do.
Keep bystanders away. Do not operate
10m
whilst people especially children or pets
are in the area.
General
1. This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of
the product by a person responsible for their safety. Chil-
dren should be supervised to ensure that they do not play
with the product. Local regulations may restrict the age of
the operator.
2. Never allow children or people unfamiliar with the in-
structions to use the machine.
3. Stop using the machine while people, especially chil-
dren, or pets are nearby.
4. Only use the trimmer in the manner and for the func-
tions described in these instructions.
5. Never operate the trimmer when you are tired, ill or
Carton Contents
Switch Handle
Steady Handle
Tube
Trimmer Head
1800 882 350 ROI
Guard
Fax : 01325 302530
Safety
The use of eye protection is recommended to
protect against objects thrown by the cutting
parts.
Do not operate in the rain or leave the product
outdoors while it is raining.
Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.
Warning: The cutting line continues to rotate after the
machine has been switched off.
under the influence of alcohol, drugs or medicine.
6. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Electrical
AVOID ACCIDENTAL STARTING. REMOVE PLUG
FROM MAINS AND KEEP FEET AWAY FROM THE
SWITCH LEVER WHEN:- CLEANING AROUND THE IN-
SIDE OF THE SAFETY GUARD, REMOVING OR REFIT-
TING SPOOL CAP , MANUALLY FEEDING OR
REPLACING NYLON LINE.
1. We recommend the use of a Residual Current Device
(R.C.D.) with a tripping current of not more than
30mA. Even with a R.C.D. installed 100% safety can-
not be guaranteed and safe working practice must be
followed at all times. Check your R.C.D . every time
you use it.
Electric Cable with
moulded on plug
Need help?
Do you have a question about the Power Trim SET250 and is the answer not in the manual?
Questions and answers