Transponder Edit; Tv-Output - Camos CSA-1300P Instruction Manual

5. Menu Operation

5.2.4 Transponder edit

5.3 Option

5.3.1 TV-Output

Copyright Homecast Europe GmbH V1.6
a) Press the Opt button to select the satellite in the left
screen or the transponder in the right screen.
b) Select one of Delete, Edit or Add from the pop-up
window. (The satellite and transponder cannot be
deleted it the channels of the selected satellite have
already been Downloaded).
c) If you press the (OK) button, the current changing
state will be saved and exit.
a) Select the TV output options using the
/ / / button.
b) If you press (OK) button, the changed state will
be saved and exit.
TV Type: Select your TV Type (PAL, NTSC,
PAL/NTCS)
SCART: Select your TV Type (RGB,YUV,
CVBS=FBAS).
TV-Screen: Select the screen format of your TV
(4:3, 4:3 Letter Box, 16:9).
RF CH N° : Set the Channel to display the audio
and video signal on your TV. If you
select channel 38 at this menu, the
satellite service will be displayed at
channel 38 on your TV.
RF Out Mode: RF Output Mode PAL
(PAL B/G, PAL D/K, PAL I among
PAL standards)
AC3: If you set it tot he enable mode, you
can listen to Dolby-digital audio
through AC-3 decoder.
22
Technische Änderungen und Irrtümer vorbehalten