A - 10 SB1 User Guide
Required
•
FTP server software
•
SB1
Setup
Make sure the SB1 is connected to the network and has a valid IP Address on the same network as the FTP
server.
The Run button should not be used.
NOTE
There are 4 fields in the application:
•
IP Address of the FTP server
•
File to transfer
•
User Name (leave blank if no credentials required)
•
Password (leave blank if no credentials required).
To transfer a file to the SB1:
Fill in the applicable fields, including the file to transfer.
1.
Press Get.
2.
File is transferred to the root of the SB1 UserDrive.
3.
To transfer a file from the SB1:
1) Fill in the applicable fields, including the file to transfer.
2) Press Send.
3) File is transferred from the root of the SB1 UserDrive to the ftp server.
Exit Application
To exit the FTP application, touch Close. The Application launcher screen appears.