4 - 8
SB1 User Guide
Speaker Adapter
Use the Speaker Adapter to add audio and Push-to-Talk functionality.
To install the Speaker Adapter onto the SB1:
Slide the Speaker Adapter onto the SB1 from the side ensuring that the Home button wraps about the SB1.
1.
Align Speaker Adapter
Figure 4-9
Lower the Speaker Adapter onto the SB1. The Speaker Adapter snaps onto the SB1. The SB1 sounds
2.
three beeps to indicate that the adapter is connected properly.
Ensure the adapter is laying flat on the SB1. If not, remove and re-attach.
3.
Speaker Adapter Installed
Figure 4-10
NOTE When removing the Speaker Adapter from the SB1, the SB1 beeps indicating that the Speaker Adapter
has been removed from the SB1.
Magnets