Cutting Units - Jacobsen 62287 Service Manual

SPECIFICATIONS AND GENERAL INFORMATION

Cutting Units

Checks and Adjustments
Reel Control—Shoulder Bolt-to-Link Slot
Measurement
Front Lift Cylinder—Cam Roller-to-Lift Cam
Measurement
Reel-to Bedknife Gap
Reel Bearing Pre-Load
Bedknife Front Face Height
2
Bedknife Front Face Angle
Bedknife Top Face Angle (rear relief)
Reel Blade Relief Angle
Repair Specifications
Reel Motor Port Fittings Torque
Front Reel Motor Hose (5) Torque (See page 8-32)
Front Reel Motor Hose (9) Torque (See page 8-32)
Center Reel Motor Hose (5) Torque (See page 8-32)
Center Reel Motor Hose (9) Torque (See page 8-32)
Reel Motor—Rear Cover-to-Body Retaining Screw
Torque
Bedknife Backing Mounting Screw Torque
Bedknife Mounting Screw Torque
Reel Bearing Housing Assembly Mounting Screw
Torque
Rear Roller Mounting Screw Torque
2-12
0.031–0.062 (0.8–1.6)
in. (mm)
0.44–0.56 (11.1–14.2)
in. (mm)
0.001–0.003 (0.025–0.076)
in. (mm)
in. (mm)
in. (mm)
degrees
degrees
degrees
lb-ft (N·m)
lb-ft (N·m)
lb-ft (N·m)
lb-ft (N·m)
lb-ft (N·m)
lb-ft (N·m)
25–37 (33.9–50.2)
lb-ft (N·m)
90–120 (10.2–13.6)
lb-in. (N·m)
18–22 (24.4–29.8)
lb-ft (N·m)
16–24 (21.7–32.5)
lb-ft (N·m)
0.040 (1.27)
0.060 (1.5)
5
8–10
45
60 (81)
55 (75)
35 (47)
35 (47)
55 (75)
18.5 (25)
4247530-Rev A