Mouse Connection; Dvr Power Connection - Response CWK6 Installation And Operating Instructions Manual

Note: If this DVR is used with the Wireless Colour Camera CCTV Kit (CWFK1), the video
output from the receiver can be connected to either channel 1, channel 2, channel 3 or
channel 4, to view the wireless camera.

5.4 Mouse Connection

PS/2 Mouse Port

5.5 DVR Power Connection

Connect the power adaptor's output plug into the DVR to power the DVR. Connect the
power adaptor's mains lead into the adaptor and plug into the mains (240VAC) wall socket
and switch ON.
The DVR will boot up.
The screen shown in Fig. 5.01 will be displayed during boot up.
After the system has booted up, the DVR will display the monitor in quad mode.
Fig. 5.01
Connect the PS/2 mouse to the port shown on the DVR. Note the
PS/2 mouse must be connected to DVR before it is powered up.
16