Connection; Mouse Connection - Response CWK5 Installation And Operating Instructions Manual

5.3.2 Connection

Connect between "VIDEO IN" of your DVR and the "VIDEO OUT" of the camera(s) with
the video extension cable(s) supplied. If any additional camera(s) have an extension
cable with a RCA male plug then use one of the supplied BNC to RCA adaptors to convert
to a BNC type for connection to the DVR. Use the 5 way splitter cable assembly already
connected to the DVR's power adaptor to power each camera (operating on 12VDC
voltage only).
1 to 5 way
Power Splitter Cable
DVR's Power Supply
Adaptor output
Note: If this DVR is used with the Wireless Colour Camera CCTV Kit (CWFK1), the video
output from the receiver can be connected to either channel 1, channel 2, channel 3 or
channel 4, to view the wireless camera.

5.4 Mouse Connection

PS/2 Mouse Port
Power to Camera(s)
Connect the PS/2 mouse to the port shown on the DVR. Note the
PS/2 mouse must be connected to DVR before it is powered up.
"VIDEO OUT" on Camera(s)
Power to DVR
CH1
"VIDEO IN" on DVR
13
Video outputs from
Camera to DVR
VIDEO INPUT
CH2 CH3 CH4