Language; Logout; Exit - Response CWK6 Installation And Operating Instructions Manual

To playback by Event list, using the [UP] / [DOWN] or channel number (CH3 for Page Up
or CH4 for Page Down) key on the front panel, select the event that you want to playback
and press the [PLAY] button. Another way is to move the mouse up or down and click the
left mouse button ("
want to playback and double click the left mouse button. This will playback the recorded
video data.

6.6 Language

The system supports multi-language OSD.
In the "Language" menu, move the cursor on the desired language and select it by pressing the
[SEL] button on the front panel, or also by clicking the left mouse button to select the language

6.7 Logout

You can use this option to log out of the system.

6.8 Exit

After you change any setting in the DVR menu, you must confirm the changes under the
"EXIT" menu.
Fig. 6.27
[EXIT & DISCARD CHANGES]
No changes saved and go back to the main screen.
[LOAD SETUP DEFAULT]
Load default setting.
" for Page Up or " " for Page Down), select the event that you
[EXIT & SAVE CHANGE]
Save changes and go back to the main
screen (Fig. 6.27).
29