XTD 1.9 Insert Installation and Operation Manual
Appendix 7: Removal Instructions
For the purpose of inspecting the insert itself or the fireplace, your insert may need to be
removed. To remove your insert follow these instructions:
Unscrew the nut fastened to the welded bolt (B) holding the faceplate to the insert.
Remove faceplate (D) assembled with the faceplate extension (C) by pulling them
towards you.
Remove the blower assembly (E).
Remove the three screws securing the pipe connector (A).
Unscrew the levelling bolts (F) located on each side of the insert.
Move the insert to perform maintenance.
59