Table of Contents
Advertisement
XTD 1.9 Insert Installation and Operation Manual
9.5 Chimney Liner Installation
The preferred methods for installing the chimney liner are found in Section 9.5.1. Use a
liner offset adapter (Section 9.5.2) only as a last resort.
9.5.1 If the Chimney Liner Does Align with the Insert's Flue Outlet, You Have Two
Options
A) Install the chimney liner starter adapter,
provided with the chimney liner. Follow
the
chimney
manufacturer's instructions.
In order to connect the chimney liner
starter adapter to the flue outlet, you can
install the brackets with the screws that
are in the owner's manual kit.
Using a powered driver, secure the
three brackets with the three screws
provided (30131) on top of the insert in
the three holes in front of the flue outlet.
The long end of the brackets must be
attached
to
the
chimney liner into the flue collar of the
unit and secure the liner to the brackets
with three self-tapping screws (not
included).
B) Your dealer may offer a liner fastening
system (AC02006), sold separately.
Follow
the
installation
provided with the liner fastening system.
liner
starter
adapter
insert.
Insert
instructions
the
45
Advertisement
Table of Contents
