Appendix 2: Installing The Adapter For Fresh Air Kit (Ac01298) - Flame Energy XTD 1.9 Installation And Operation Manual

XTD 1.9 Insert Installation and Operation Manual

Appendix 2: Installing the Adapter for Fresh Air Kit (AC01298)

Note: Only remove the knock-out on the side that will be connected to the fresh air inlet.
To install a fresh air intake to the insert, the purchase of accessory AC01298 adapter is
required.
Using pliers, remove the rectangular knock-out plate (A) located on the left or right side of
the convection air jacket. Choose the side that is best for your installation.
50