Installation - Intellinet 502023 User Manual

Ports
All ports on the Fast Ethernet Office Switch support Auto-MDI/MDI-X
functionality, so crossover cables and uplink ports are not needed for
connections to PCs, routers, hubs, additional switches or other devices.
Cat5/5e UTP/STP cables provide optimal performance; if a top-panel
LED corresponding to any of the ports in use doesn't indicate a link or
activity, check the connected device for proper setup and operation.
Model 502054

installatiOn

Prior to use, it is recommended that the device be placed/positioned:
• on a level surface that can support the weight of the switch (and any
other items that need to be considered);
• with a minimum of 25 mm of clearance on the top and sides for
adequate ventilation;
• away from sources of electrical noise, such as radios, transmitters and
broadband amplifiers; and
• where it cannot be affected by excessive moisture.