Connections & Indicators; Installation - Intellinet IES-08-2.5G01 Instructions Manual

Connections & Indicators
LEDs
The LED indicators make it easier to
monitor the switch and its connections.
Ports
All RJ45 ports on the switch support
Auto-MDI/MDI-X functionality, so you
can use straight or crossover UTP/STP
cables to connect the RJ45 ports to
PCs, routers, hubs, other switches, etc.
Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord and adapter to connect the device to an
AC outlet. Confirm that the Power LED on the front panel is lit.

Installation

Prior to use, it is recommended that
the switch be placed/positioned:
• on a level surface
that can support the weight of the switch;
• with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
Attach the rubber feet to the bottom of each corner of the switch to increase stability.
Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
For specifications, visit intellinet-network.com. Register your product at register.
intellinet-network.com/r/562096 or scan the QR code on the cover.
English
2
LED Color Status
On
Green
PWR
Off
On
Link/
Green Flashing Sending or receiving data.
ACT
Off
On
SFP+ Green
Off
Instructions
Status Description
Power On
Power Off
Valid port connection.
No link establlished.
Valid port connection.
No link establlished.