Phone Number Preset - Kenwood DNX9140 Instruction Manual

Hands Free Unit Control
D
Say the phone category to register (1 st try)
Say within 2 seconds after the Beep.
II
Say the phone category to register (2nd try)
Say within 2 seconds after the Beep.
D
End voice registration
~
~
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
try.
58
\~
DNX9140/DDX814/DDX8034BT
Phone Number Preset
Registers frequently used phone number to
Hands Free control screen preset button.
D
Display the Hands-Free Control screen
See <Making a call> (page 52).
II
Select the Preset number to register
• If no Preset number is registered, pressing this button
momentarily moves to the step 3.
D
Select the search destination of the number
to register
[r:::J:l] Registers from Phonebook.
[it] Registers from outgoing calls list.
[fQa] Registers from incoming calls list.
[fUl] Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] (DDX8141 DDX8034BT only)
Registers voice for voice recognition to preset
number.
[Memory] Registers the currently displayed
phone number.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
EI
Search phone number to register with each
function