Before Applying Power - Kenwood RDX-VH7 Instruction Manual

2

Before applying power

Units are designed for operation as follows.
U.S.A. ............................................................................. AC 120 V only
Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLT-
AGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CLASS 1
LASER PRODUCT
The marking is located on the rear panel and says that
this product has been classified as Class 1. It means
that there is no danger of hazardous radiation outside
the product.
Caution : Read this page carefully to ensure safe operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN-
SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The marking of products using lasers
(Except for some areas)
EUROPE & U.K. ............................................................ AC 230 V only
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE
TO BEAM.
Inside of this laser product, a component (a laser diode:
Wavelength: 760-800nm) classified as Class 3A laser
radiation is contained as alerted by the internal caution
label shown above. To avoid exposure to laser beams,
do not open the cover.
Before applying power
RD-VH7/X-VH7 (EN)