System Connection; Connection Of Antenna; Rd-Vh7/X-Vh7 (En - Kenwood RDX-VH7 Instruction Manual

System connection

12

1. Connection of antenna

Connect the antenna as shown in the figure.
Do not plug the power cord into a wall AC outlet until the connection has been completed.
1 2
Connection of the Accessory Antenna
AM loop antenna
The supplied antenna is for indoor use. Place it as far as
possible from the main system, TV set, speaker cords and
power cord, and set it to a direction which provides the
best reception.
AM loop
antenna
In case of bad reception
FM outdoor antenna
Lead the 75 coaxial cable con-
nected to the FM outdoor antenna
into the room and connect it to the
FM 75 terminal.
FM outdoor antenna
(commercially available)
75 coaxial cable
(Commercially available)
3
FM indoor antenna
The accessory antenna is for temporary indoor use only.
For stable signal reception we recommend using an out-
door antenna. Remove the indoor antenna if you connect
one outdoors.
GND
ANTENNA
AM
FM 75
GND
ANTENNA
AM
FM 75
DIGITAL
SYSTEM
OUT
OPTICAL
CONTROL
(Commercially available)
1 Plug into the terminal.
2 Locate the position providing good
reception condition.
3 Fix the antenna.
Amplifier-tuner/ CD player
(RD-VH7)
FM 75
System connection

RD-VH7/X-VH7 (EN)

FM indoor
antenna