Kenwood RDX-VH7 Instruction Manual page 52

52
Adjust the clock before setting the timer.
3
Enter the ON time.
1
Set the timer ON time by rotating the "multi
control" knob.
To put back
the time
2
Press the "enter" key.
3
After entering the "hour" with the proce-
dure in 1 and 2, enter the "minute" using
the same procedure.
4
Enter the OFF time.
1
Set the timer OFF time by rotating the
"multi control" knob.
To put back
the time
2
Press the "enter" key.
3
After entering the "hour" with the proce-
dure in 1 and 2, enter the "minute" using
the same procedure.
5
Make the desired reservation.
For timer playback or AI timer playback
1
Rotate the "multi control" knob to select the timer mode.
multi control
1 Select "PLAY" or "AI PLAY".
enter
2 Press the "enter" key.
multi control
To advance
the time
multi control
To advance
the time
PLAY ........ Timer play
REC
AI PLAY ... Timer play with gradually in-
creasing volume
MODETIMES
EEEEEEPLAY
Continued on next page
1
ON time setting
ONOTIMES
EAMM10:30
Blinks
÷ If you make a mistake in the middle, press the "mode"
key to cancel the operation and restart it from step 2.
1
OFF time setting
OFFOTIMES
EAMM11:30
Blinks
÷ If you make a mistake in the middle, press the "mode"
key to cancel the operation and restart it from step 2.
Timer recording of radio broadcasts
1
Rotate the "multi control" knob
to select the record mode.
multi control
enter
2
Select the input source.
multi control
enter
Continued on next page
Timer operation
RD-VH7/X-VH7 (EN)
Select "REC".
PLAY
REC
AI PLAY
Press the "enter" key.
Select the source to
be recording.
TUNER
AUX
Press the "enter" key.