Download  Print this page

Kenwood CD-403 Instruction Manual

Hide thumbs

Advertisement

CD PLAYER
DPF-R 6030 CD-406
DPF-R 4030 CD-404
DPF-R 3030 CD-403
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country and
sales area.
DTS disclaimer clause
When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo out-
puts. To avoid possible damage to the audio system, the consumer should take proper pre-cautions
when the analog stereo outputs of the CD player is connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the digital output (S/PDIF, AES/EBU, or TosLink) of the CD player.
COMPACT
DIGITAL AUDIO
DIGITAL AUDIO
TEXT
B60-4404-01 (EN)
COMPACT
TEXT

Advertisement

loading

  Related Manuals for Kenwood CD-403

  Summary of Contents for Kenwood CD-403

  • Page 1 DPF-R 6030 CD-406 DPF-R 4030 CD-404 DPF-R 3030 CD-403 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. DTS disclaimer clause When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo out- puts.
  • Page 2: Before Applying Power

    Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ..............AC 120 V only Europe and U.K................. AC 230 V only Australia ..................AC 240 V only China and Russia ..............
  • Page 3: Table Of Contents

    ¶ Edit mode is the function for rearranging tracks according to the tape length so that no music is interrupted in the middle. ¶ Auto space function. Easy operation functions ¶ Easy operation functions allow systematic operation with other KENWOOD components connected through the system control connection. TAR ® Partner, Kenwood Corpora- As an...
  • Page 4: System Connections

    System connections Malfunction of microcomputer Caution: If operation is not possible or erroneous display appears even though Do not plug in the power lead until all connections are all connections have been made properly, reset the microcomputer completed. £ referring to “In case of difficulty”. Make connections as shown below.
  • Page 5 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals.
  • Page 6: Controls And Indicators

    Controls and indicators CD-406/DPF-R6030 (The displays given in this manual are approximations only. They Play indicator Text information display may differ from what actually appears on the display.) Pause indicator CD-404/403/DPF-R4030/R3030 EDIT indicator Program check indicator RANDOM indicator Program mode indicator REPEAT indicator Music calendar (1 ~ 20) FILE...
  • Page 7 Controls and indicators The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1 ON/STANDBY (POWER / 9 RANDOM key ) key Turns the unit ON/STANDBY. Press to play the tracks in a random order. 2 P.MODE key 0 REPEAT key &...
  • Page 8: Operation Of Remote Control Unit

    Operation of remote control unit (Except for CD-403/DPF-R3030) The keys with the same name as those on the main unit operate the same way as on the main unit. The keys marked * are provided only on the remote control unit. 1 DISC SELECTOR keys *4 OUTPUT (DOWN, UP) keys 5 2 DISC SKIP key...
  • Page 9: Preparing To Play Tracks

    Preparing to play tracks Preparation • Turn the unit ON. Press the ON/STANDBY (POWER / )key. POWER ON/STANDBY Loading/unloading discs Load/unload a disc. Open the tray. OPEN/CLOSE Place/remove a disc. ÷ Do not touch the played side of disc. Label side Disc tray When loading or unloading other discs DISC SKIP...
  • Page 10: Normal Play (Track Mode)

    Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. Playing tracks in order from track No. 1 Check that the unit is in the TRACK mode. ! CD-406/DPF-R6030 Start playback.
  • Page 11: Playback From Desired Track

    Normal play (TRACK mode) Playback from desired track Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Select the desired track No. Main unit Remote control unit Press the numeric keys as shown below..To enter track No. 23 : +10, +10, 3 To enter track No.
  • Page 12: Displays

    Displays You can select the display type and check the disc informa- tion. Preparation ÷ Load a disc in the CD player. Each press the TIME DISP. key, the display changes as follows: TIME DISP. CD-406/DPF-R6030 During playback: 1 Track title (Only when the current disc is a CD TEXT disc.) CD-404/403/DPF-R4030/R3030 During playback: 2 Elapsed time of the track now playing...
  • Page 13: Programmed Play (Pgm Mode)

    Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Preparation ÷ Load a disc in the CD player. Press so that the “PGM” indicator lights. Blinks. CD-406/DPF-R6030 Do this operation in the stop mode. P.MODE CD-404/403/DPF-R4030/R3030 Light up.
  • Page 14: To Check Or Change The Programmed Tracks

    Programmed play (PGM mode) To stop playback ÷ The programmed contents remain in memory. To check or change the programmed tracks CD-406/DPF-R6030 Press the CHECK key. Blinks. CHECK Press until the track No. to be changed is displayed. Select the disc. CD-404/403/DPF-R4030/R3030 DISC 1 DISC 2...
  • Page 15: To Clear Tracks From The Program

    Programmed play (PGM mode) To clear tracks from the program Press to clear tracks from the end. ÷ Each time the key is pressed, the last track in the program is cleared. CLEAR ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
  • Page 16: Playback In A Random Order (Random Playback)

    Playback in a random order (Random playback) As tracks are selected at random, you can enjoy listening to for a long time. Preparation ÷ Load a disc in the CD player. ™ Check that the unit is in the TRACK mode. ! Press the RANDOM key.
  • Page 17: Repeated Playback

    Repeated playback Preparation ÷ Load a disc in the CD player. ™ To repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. CD-406/DPF-R6030 Press so that the “PGM” indicator goes off.
  • Page 18: To Repeat Only The Programmed Tracks

    Repeated playback To repeat only the programmed tracks CD-406/DPF-R6030 Press so that the “PGM” indicator lights. P.MODE CD-404/403/DPF-R4030/R3030 Select the disc. PGM indicator lights up. DISC 1 DISC 2 DISC 3 FILE MULTI RANDOM EDIT DISC 4 DISC 5 AUTO PAUSE Go to step 3 within 8 seconds.
  • Page 19: Editing

    Editing (Except for CD-403/DPF-R3030) The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Preparation ÷ Load a disc in the CD player. ÷...
  • Page 20: To Check The Edited Contents

    Playing or recording the edited contents When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks. ÷ Do not adjust the output level from this unit particularly during record- ing.
  • Page 21: Timer Operations

    Timer operations Timer playback of CD can be started at any time using an This unit audio timer which is available in audio stores. Preparation System control cord Audio cord ÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer.
  • Page 22: Maintenance

    Maintenance Disc handling precautions Discs which can be played with this unit CD (12 cm, 8 cm) and the audio part of CDV, CD-G, CD-EG and CD- EXTRA. Handling Use discs that comply with the IEC standard, for example a disc Hold the discs so that you do not COMPACT carrying the...
  • Page 23: In Case Of Difficulty

    In case of difficulty What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microcomputer may malfunction (impossibility to operate, erroneous display, etc.) when the connection cords are un-...
  • Page 24: Specifications

    H : 124.5 mm (4-15/16") Weight (Net) ............ 5.1 kg (11.2 lb) 398 mm(15-5/8") Weight (Net) ............ 5.1 kg (11.2 lb) 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Notes Notes Notes 2.

This manual is also suitable for:

Cd-403sCd-404Cd-406Dpf-r3030Dpf-r4030Dpf-r6030