Recording Only Desired Tracks (One Touch Edit; Press The "P.mode" Key - Kenwood RDX-VH7 Instruction Manual

48
Recording only desired tracks
(ONE TOUCH EDIT.....single track recording)
When playing a CD and a track that you want to
record begins, simply press the "O.T.E. (One-Touch
Edit)" key. This allows to record the current track
from the beginning.
Recording preparations are required.
1
Play a CD.
Use other mode than random playback.
Press the "6 CD" key.
2
If you want to record the track being played.
Press the "TAPE O.T.E." key.
TAPE
÷ When the MD recorder is connected to the amplifier-
tuner/ CD player, pressing the "MD O.T.E." key allows
to record the CD track onto an MD.
When recording has been completed, a non-re-
corded portion of 4 seconds will be produced and
the cassette deck part will stop. The CD player
will enter temporary stop condition.
To record a different track, repeat the steps 1 and
2.
CD
MD
O.T.E.
6
TAPE O.T.E. 7
r , t (Steps 1 to 4)
If you set "crls" beforehand you can enjoy bet-
ter recording.
07
0:08
MUTE
TRACK
N.B.I
PROG.1 2
A.P.S.
TA NEWS
PURE A
07
0:01
TRACK
N.B.I
A.P.S.
PURE A
÷ Playback restarts from the beginning of the track being
played and recording starts at the same time.
To end recording in the middle
Press the "7 stop" key in the middle of playback.
Recording onto cassette tape
RD-VH7/X-VH7 (EN)
6
RD-VH7
7 stop
y
In case the key is pressed with
track No.7.
CD