Program Timer Playback (Ai Timer Playback) And Timer Recording; Prog 1 - Kenwood RDX-VH7 Instruction Manual

Adjust the clock before setting the timer.

Program timer playback (AI timer playback) and timer recording

Two timer programs (PROG.1, PROG.2) are available. Both of them are 24-hour timer programs which can
be executed every day.
Each of timer reservation programs PROG.1 and PROG.2 can store the time zone and contents of timer
operation, which can be executed or deactivated as required.
÷ To record a digitally broadcast CS or BS program, connect the analog input from source to the AUX jacks. (Only the
analog input can be recorded.)
÷ It is possible to execute both timer reservation programs PROG.1 and PROG.2 simultaneously.
÷ The time zones of PROG.1 and PROG.2 should be set by reserving an interval of 1 minute or more so that they are not
overlapped.
Be sure to adjust the clock before setting the timer.
1
Select the source to be played (recorded) and adjust its playback volume.
÷ To listen to radio
The station should be preset
prior.
÷ To listen to MD
Set a disc into the MD recorder.
For recording and playback with an MD recorder (DM-VH7), also refer to the
instruction manual enclosed with the DM-VH7.
2
Select the timer reservation mode.
1
Press the "mode" key.
2
Rotate the "multi control" knob to select
"TIMER SET ?", then press the "enter" key.
3
Rotate the "multi control" knob to select
"PROG.1 SET ?", then press the "enter" key.
multi control
Continued on next page
÷ To listen to CD
Insert a disc.
›
(Program playback is not possi-
ble.)
÷ For recording
Make preparations for record-
r,t
ing.
enter
\
\
÷ To listen to tape
Set a tape into deck.
§
÷ Recording or playing the AUX
source component
Steps 1 to 4
For timer playback or timer re-
cording of a source component
connected to the AUX jacks,
connect it properly by referring
to "Connection of audio cord".
Example for playing radio broadcast from 10:30am
to 11:30am using PROG.1
2
Timer setting selection
TIMERTSET?
TIMERSETT?
3
PROG.1 selection
PROG.1SET?
EEEEESETT?
÷ If you make a mistake in the middle, press the "mode"
key to cancel the operation and restart it from step 2.
÷ When a timer reservation already has been made, the
contents will change to the new settings.
Timer operation
RD-VH7/X-VH7 (EN)
¡
‚
#
Blinks
Blinks
51