Cassette Deck Operations; Playback Of Tape - Kenwood RDX-VH7 Instruction Manual

40

Playback of tape

To wind tape at high speed
To stop playback
Start playback
Tape exposed side
Insert the cassette straight into
the insertion slot. Just push
lightly and the cassette will be
pulled automatically inside.
Cassette deck
O.T.E.
Selection of reverse mode
To reduce tape noise
1. Load/ eject a cassette tape.
Press the "0 eject" key to eject the cassette.
÷ Avoid using tapes of which the label is not firmly adhered.
÷ Normal (TYPE I), high (TYPE II), or metal (TYPE IV) tape selection is set
automatically.
÷ It is not recommended to use a 100-minute or longer cassette tapes, for
these tapes are very thin and may easily cause troubles such as entangle-
ment and cutting.
÷ Remove tape slack before loading.
2. Start playback.
Press the "2 rev" or "3 fwd" key
according to the desired tape
transport direction.
2 2
"2 rev"
(Playback of the
reverse side)
1 1
To stop playback
To pause the tape
To wind tape at high speed
"3 fwd"
(Playback of the
top side)
Recording onto cassette tape
2 2
function indicator
Dolby NR
direction
Blinks
RD-VH7/X-VH7 (EN)
Y
Y
direction