Connecting Wires To Terminals - Kenwood KDC-X879 Instruction Manual

Connecting Wires to Terminals

A
Subwoofer output
KDC-X979
(Black)
KDC-MP925 Subwoofer right
output (Red)
KDC-X879 Subwoofer right
output (Red)
FM/AM antenna input
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier, connect to
its power control terminal.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier of
the film-type antenna.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To "EXT.AMP.CONT. " terminal of the amplifier having
the external amp control function.
Car fuse box
(Main fuse)
56
|
English
B
Center output
(Black)
Subwoofer left
output (White)
Subwoofer left
output (White)
To car light control switch
To front left
speaker
To front right
speaker
To rear left
speaker
To rear right
speaker
Ignition key
switch
–
+
Battery
Fuse (10A)
Power control wire (Blue/
P.CONT
White)
ANT.
Motor antenna control wire
CONT
(Blue)
TEL mute wire (Brown)
TEL MUTE
External amplifier control wire
(Pink / Black) (KDC-X979/X879 only)
Dimmer control wire (Orange
/ White)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
ACC
Car fuse box
Ground wire (Black) - (To car chassis)
A
B
Front right output (Red)
Front left output (White)
Rear right output (Red)
Rear left output (White)
AUX right input (Red)
AUX left input (White)
To KENWOOD disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these
leads, refer to the
relevant instruction
manuals.
FRONT • L
FRONT • R
REAR • L
REAR • R
Ignition wire (Red)
Battery wire (Yellow)
Wiring harness
(Accessory1)