Dimmer; Off Wait Time Setting; Eject Angle Setting; Panel Action Setting - Kenwood KDC-X879 Instruction Manual

Menu system

Dimmer

Dimming this unit's display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer: ON" The display dims.
"Dimmer: OFF" The display doesn't dim.

OFF Wait Time Setting

Setting the time until the faceplate hide
operation starts after the power is turned OFF.
The faceplate can be removed only during the set
time period.
Display and Setting
"Off Wait : 0sec"
"Off Wait : 3sec" (Original setting)
"Off Wait : 25sec"
In Standby mode

Eject angle setting

This function sets the opening and closing
operation of a panel when a disc is inserted and
when it is ejected.
Display Setting
"Eject ANG: Slope" Opens and closes the panel while maintaining
the angle of the control panel to the set angle.
"Eject ANG: Level" Opens and closes the panel after setting the
angle of the control panel to the horizontal
position.
48
|
English
In Standby mode

Panel action setting

Sets the panel movement when the panel action
(back/forward movement) is set to its most end
position.
Display Setting
"Panel Control:1" No angle can be adjusted if the panel position
has been set to its most end position. Also, if you
have set the angle below the horizontal position,
the angle is set to horizontal when you set the
panel to its most end position.
"Panel Control:2" The angle can be adjusted regardless of the
panel position.
Function of the KDC-X879
System Q Setting
Setting whether the display indicates the System
Q factors (Bass center frequency, Bass Q factor,
Bass extend, Middle center frequency, Middle
Q factor, and Treble center frequency) in Audio
control.
Display Setting
"System Q: ON" The System Q factors are displayed.
"System Q: OFF" The System Q factors aren't displayed.
Function of the KDC-X979
Audio Setup
Switches between the Easy mode and PRO mode
(for detailed setup) during Audio setup.
Display Setting
"Audio Setup:Easy" Selects the quick Audio setup.
"Audio Setup:PRO" Selects the detailed Audio setup.
• Refer to 'Audio Setup (Easy)' (page 28) and 'Audio
Setup (PRO)' (page 28).
"Audio Setup:Easy" : [CABIN] [SP-SEL] [SP-LEV] [CALL]
"Audio Setup:PRO" : [X'over] [DTA] [EQ] [SP-LEV]
[MEMORY] [CALL]