Sound Management Features (Kdc-X979); Audio Control - Kenwood KDC-X879 Instruction Manual

Function of the KDC-X979
Sound management features

Audio control

1
Select the source for adjustment
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD CTRL" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
3
Enter Audio Control mode
Press the [2] ("AD CTRL") button.
4
Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
5
Select the Audio Control item for
adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
26
|
English
1 - 6 NEXT
4
ranges of all stage section's tables on the
following pages.
1st section
Multi-function key operation
[2] "PLII"
[3] "WOW"
[4] "OFF"
[5] "FINE" [2] "PNRM"
[3] "DIM"
[4] "CT-WDTH"
[2] "FOCUS"
[3] "TruBass-F"
[3] "TruBass-R"
[4] "SRS 3D"
• When you select the "MUSIC" using "PLII", you can set
the "PNRM", "DIM" and "CT-WDTH" using the "FINE"
function. Also, when you select the "WOW", you can
set the "FOCUS", "TruBass-F/TruBass-R", and "SRS 3D"
using the "FINE" function.
SRC
¢
Audio control item
Dolby ProLogic II setting
SRS WOW setting
OFF setting
Panorama setting
Dimension control
Center width control
FOCUS setting
SRS TruBass Front setting
SRS TruBass Rear setting
SRS 3D setting