Subwoofer Output - Kenwood KDC-X879 Instruction Manual

• * Function of the KDC-X879
• According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor Bass Center Frequency
1.00/1.25/1.50 60/70/80/100
2.00 60/70/80/150
• When the bass extend is set to ON, low frequency
response is extended by 20%.
• WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
WOW TruBass FOCUS
High ON High
Low ON Low
OFF OFF OFF
• TruBass: Assisting the playback for the super bass
sound.
• FOCUS: Adjusts the sound image by changing the
vertical position of the speakers virtually and
increases or decreases the soundscape.
• SRS 3D: Making a natural 3D sound field.
• SRS 3D cannot be set in tuner source.
2nd section
[2] button
Adjustment Item Display
Subwoofer level "SW LEVEL"
Subwoofer phase "PHASE"
[3] button
Adjustment Item Display
Front High Pass Filter "X'OVER Front"
Rear High Pass Filter "X'OVER Rear"
[4] button
Adjustment Item Display
Subwoofer "X'OVER Sub Woofer" 50/80/120/Through Hz
Low Pass Filter
SRS 3D
ON
ON
OFF
Range
–15 — +15
Normal (0°)/Reverse (180°)
Range
Through/40/60/80/100/
120/150/180/220 Hz
Through/40/60/80/100/
120/150/180/220 Hz
Range
[5] button
Adjustment Item Display
Loudness "LOUD"
• Loudness: Compensating for low and high tones
during low volume.
3rd section
[2] button
Adjustment Item Display
Balance "BL"
Fader "F"
[3] button
Adjustment Item Display
Volume offset "VOL OFFSET"
• Volume offset: Each source's volume can be set as a
difference from the basic volume.

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it's ON, "SUB WOOFER ON" is displayed.
Range
ON/OFF
Range
Left 15 — Right 15
Rear 15 — Front 15
Range
–8 — 0
23
|
English