The Polaris 9550 Sport/P955 Cleaner Control Unit; Starting The Cleaner - Polaris 9350 Owner's Manual

4.4

The Polaris 9550 Sport/P955 Cleaner Control Unit

Display Current
Time/ Set Time
Program Cleaning
Cycles / Set Time
Dirty Filter
indicator
Select Cleaning Level
Select Cleaning Surface
4.5

Starting the Cleaner

The default cleaning surface setting for the Polaris
cleaners is Bottom Surface
current programmed cycle, see Section 5. Programming
the Cleaner.
Select Cleaning Surface (all models):
Use to change cleaning surface setting.
Toggle between:
Bottom and Sides
Waterline (9550 Sport/P955)
Select Cleaning intensity Level
(9550 Sport/P955 only):
Use to choose cleaning intensity level.
Toggle between:
. To change the
Bottom Only
INTENSIVE
HIGH INTENSITY
Select Pool Shape (9550 Sport/P955 only):
Use to choose pool shape.
Toggle between:
Begin Cleaning:
After selecting the cleaning surface and other options as
applicable, press to begin operation.
The screen displays the time remaining for the selected
cycle. For example, 0:44 on the display indicates that
cleaning will be completed in 44 minutes.
NOTE: The control unit automatically switches to standby
power mode after 10 minutes of inactivity and the
display screen turns off. Press any key to exit standby
mode. Cleaner will continue to function in standby
mode if in the middle of a cleaning cycle.
Page 11
Navigate Day/hour
Validate Time Setting
Selection
Cancel Programming
Remove Cleaner
from Pool
Start/Stop Cleaner
Operation
Select Pool Shape
RECTANGULAR
FREEFORM