Section 8. Troubleshooting; Using The Information Led For Troubleshooting (9350 / P935 Cleaner); Viewing Cleaner Status Information For Troubleshooting (9450 Sport/P945 And 9550 Sport/P955) - Polaris 9350 Owner's Manual

Section 8. Troubleshooting

8.1

Using the information LED for Troubleshooting (9350 / P935 Cleaner)

The Information LED
cleaner malfunctions.
information LED Flashing
interval.
interval
second interval
8.2 Viewing Cleaner Status information for Troubleshooting (9450 Sport/P945 and 9550
Sport/P955)
Information about your cleaner's current status and any relevent error condition is available through a
troubleshooting status screen. To view this information:
1. Remove cleaner from the pool and turn power off.
2. Press
and
The following cleaner operation messages are displayed consecutively for three (3) seconds:
After cycling through each message, control unit returns to current day and time display.
on the control unit flashes in a specific sequence to indicate one of three possible
If the problem is not resolved through troubleshooting, contact
Polaris Technical Support at (USA) 1-800-822-7933.
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933.
Check the pump axis for debris.
Check propellor for debris.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933.
Total hours cleaner has operated since new.
Last error code (if cleaner has had at least one error).
Time (in operating hours) the error occurred.
Solution
Page 21