Table of Contents
Advertisement
Administration (continued)
Restoring factory defaults
Before restoring the factory defaults, you should export your current system settings in case you need to re-
import them later. (see Saving your system setup and Loading your system setup)
Step
Action
1
Shut down the system.
2
Switching off the DVR
Push a paper clip into the Reset button (on the rear of the DVR) and hold it there.
4
Switching on the DVR
5
Wait for all the LEDs to flash 5 times (about 30 seconds).
6
Withdraw the paper clip.
22
DPR-2016/500D
Advertisement
Table of Contents
